Instructors
The Complete AutoDesk AutoCad 2D and 3D Live Course
অটোক্যাড হচ্ছে একটি কম্পিউটার এইডেড ডিজাইনিং সফটওয়্যার। যার সহায়তায় ডিজাইনার ও ইঞ্জিনিয়ার সহজেই দ্বিমাত্রিক (2D) এবং ত্রিমাত্রিক (3D) ডিজাইন তৈরি করতে পারে এবং যে কোনো যন্ত্রের স্থানান্তরযোগ্য পার্টস ডিজাইন করতে পারে। বর্তমানে স্থাপত্য প্রকৌশল শিল্প ও ইঞ্জিনিয়ারিং কাজ এর ক্ষেত্রে অটোক্যাড গুরুত্বপূর্ন স্থান করে নিয়েছে। কম্পিউটার বেসিক জানা থাকলেই অটোক্যাড কোর্সে অংশগ্রহণ করতে পারবেন |
প্রো-অফারে শুধুমাত্র ৪৯৯০ টাকা রেজিস্ট্রেশন ফি দিয়ে সম্পূর্ণ কোর্সটি করার সুযোগ পাচ্ছেন। নিচের দিকে গিয়ে আপনার কাঙ্খিত ব্যাচটিতে জয়েন করার জন্য “Enroll Now” বাটনে ক্লিক করুন, পরবর্তী পেইজে কোর্সটির মূল্য ৪৯৯০ টাকা দেখাবে।
কিভাবে কোর্স অর্ডার করবেন দেখুন কিভাবে লাইভ ক্লাস করবেন দেখুন এ কোর্সের বিগত ব্যাচের কিছু ক্লাসের ভিডিও দেখুন
কম্পিউটার না থাকলে দেশব্যাপী ইশিখন এজেন্ট সেন্টারগুলোতে গিয়েও ক্লাসে অংশ নিতে পারবেন। আমাদের দেশব্যাপী এজেন্টসমূহ দেখতে ক্লিক করুন।
Description
অটোক্যাড (AutoACAD) হলো একটি পাওয়ারফুল ইঞ্জিনিয়ারিং ডিজাইন সফটওয়্যার। মার্কিন যুক্তরাষ্ট্রের Autodesk Inc নামে একটি কম্পানি ক্যাড সফ্টওয়্যারটি তৈরি করেন। স্কেলিং তথা বিল্ডিং ডিজাইনের ক্ষেত্রে অটোক্যাড এর বিকল্প এখনো তৈরি হয়নি। এছাড়াও ডিজাইন, ব্লক, সিম্বল, লোগো ডিজাইন, গ্রিল ডিজাইন, এমব্রডারীর কাজও অটো ক্যাড এর মাধ্যমে করা হয়ে থাকে। অটোক্যাড সফটওয়্যার এর মাধ্যমে আর্কিটেক্ট প্লানার, সিভিল ইঞ্জিনিয়ার, ইলেকট্রিক্যাল ইঞ্জিনিয়ার, মেকানিক্যাল ইঞ্জিনিয়ার, গ্রাফিক ইঞ্জিনিয়ার, এমব্রডায়রি ডিজাইনার সহজেই তাদের সুবিধামত ড্রইং করতে পারেন। অটোক্যাড মূলতঃ বিভিন্ন জ্যামিতিক বা গ্রাফিক্যাল অবজেক্ট এর সমন্বয়। যেমনঃ রেখা, বৃত্তচাপ, বৃত্ত, টেক্সট বা লেখা। এছাড়াও ব্লক বা গ্রুপ অবজেক্ট আনুষঙ্গিক অবজেক্ট প্রপার্টিজ যেমনঃ কালার, লেয়ার, লাইন টাইপ আ্যাট্রিবিউট ইত্যাদি ব্যবহার করে সাচ্ছন্দে ড্রইং করা যায়। সাধারণ ড্রইং সীটে যে ড্রইং করা হয় এবং অটোক্যাড এডিটরে যে ড্রইং করা তার কার্যপ্রনালী কিছুটা ভিন্ন তবে সুবিধা অনেক বেশি।
অটোক্যাড এর কাজ হলো দ্বিমাত্রিক অবজেক্ট নিয়ে। এখানে টু-ডি ও থ্রি-ডি উভয় ধরনের অবজেক্ট তৈরি করা যায়। তবে টু-ডি অবজেক্ট তৈরি করে পরবর্তীতে একে থ্রিডি তে রূপান্তরিত করা যায়। অটোক্যাড এ তৈরিকৃত ডিজাইনকে থ্রিডিতে রূপান্তর করার 3D Studio Max , Maya ইত্যাদি বিভিন্ন ধরনের থ্রিডি প্রোগ্রাম ব্যবহার করা হয়। আবার অটোক্যাড এ সরাসরি থ্রিডি ডিজাইন তৈরি করা যায়। AutoACAD এ থ্রিডি অপেক্ষা টু-ডিতে কাজ করা সহজ।
কাদের জন্য কোর্সটি ?
যারা ড্রাফটসম্যান পদে চাকরির জন্য আবেদন করতে চান
যারা ডিজাইন সফটওয়্যার সম্পর্কে জানতে চান
যারা পড়াশুনার পাশাপাশি পার্টটাইম কিছু করে পড়াশুনা চালিয়ে নিতে চান
কোর্সে কি কি শেখানো হবে ?
Introduction to AutoCAD
Make Structural drawing
Creating Drawings
Modifying and Manipulating Drawings
Drawing Tools
Dimensioning and Text
Preparing Layout and Plotting
Introduction to 3D solid modeling
Freelancing Marketplace
কোর্স শুরুর পূর্বে যা প্রয়োজন
*AutoCad 2D and 3D কোর্সটি শুরু করার পূর্বে অন্য কোন বিষয়ের উপর ধারনা থাকার প্রয়োজন নেই , তবে অবশ্যই কম্পিউটার এবং ইন্টারনেট পরিচালনায় কিছুটা দক্ষ হতে হবে।
ইন্টারনেট কানেকশসহ একটি কম্পিউটার
একটি হেডফোন ল্যাপটপ হলে হেডফোন আবশ্যক নয়।
কম্পিউটার কনফিগারেশন
CPU: Intel core i3/core i5 or AMD ryzen5
Motherboard: Supports 32GB or more ram and SATA 3.0 and 2TB-4TB HD
Ram: 8 GB
GPU: 2 GB
SSD: 256 GB
Hard Disk: 1TB
বিশেষ সুবিধা সমুহ
লাইভ ক্লাস মিস করলে পরের দিন কোর্সের ভেতর উক্ত ক্লাসের ভিডিও রেকর্ডিং ও আলোচিত ফাইল সমূহ পাবেন।
কোর্স শেষেও লাইফ টাইম সাপোর্ট। যতদিন না আপনি কাজ পাচ্ছেন ততদিন এক্সপার্ট ফ্রিল্যান্সার দ্বারা তত্ত্বাবধান। ক্লাসের বাইরেও রয়েছে লাইভ সাপোর্ট, ফোন, ফেসবুক এবং মেসেঞ্জার গ্রুপ সাপোর্ট।
প্রতিটি ক্লাসের প্রথম ১৫ মিনিট আগের ক্লাসের সমস্যাগুলো সমাধান হবে, পরের ১ ঘন্টা মূল ক্লাস শেষ ১৫ মিনিট প্রশ্নোত্তর পর্ব।
প্রতিটি ক্লাসে রয়েছে মডেল টেস্ট এবং এসাইনমেন্ট।
কোর্স শেষে আপওয়ার্ক, ফাইভার, ফ্রিল্যান্সারসহ বিভিন্ন মার্কেটপ্লেসের উপর স্পেশাল ফ্রিল্যান্সিং ক্লাস। তাছাড়াও রয়েছে রিভিউ/প্রবলেম সলভিং ক্লাসসমূহ।
কোর্স শেষে অনলাইন ভেরিফায়েড সার্টিফিকেট।
কোর্স শেষে আয়ের ক্ষেত্রসমুহ:
ফ্রিল্যান্সিং মার্কেটপ্লেসে কাজ করতে পারবেন
আর্কিটেক্ট ডিজাইনার হিসেবে কাজ করতে পারবেন
যেকোনো ইঞ্জিনিয়ারিং প্লাটফর্মে অটোডেস্ক অটোক্যাড সর্ম্পকিত কাজ করতে পারবেন
Course Batches
Course Curriculum
Introduction to AutoCAD | |||
Introduction to AutoCAD | 00:00:00 | ||
Starting a New File and Opening an Existing One | 00:00:00 | ||
User Interface in AutoCAD | 00:00:00 | ||
Saving Drawing Files as an AutoCAD Template | 00:00:00 | ||
Ribbon, Workspace, Help and Command search | 00:00:00 | ||
Pan and Zoom tools | 00:00:00 | ||
Specifying & Setting Up Drawing Units | 00:00:00 | ||
Saving Drawing Files as an AutoCAD Template | 00:00:00 | ||
Using Drawing Tools | |||
Understanding Coordinate Systems and Line tool | 00:00:00 | ||
Using Line tool | 00:00:00 | ||
Using Absolute Coordinate System | 00:00:00 | ||
Using Relative Rectangular Coordinate System | 00:00:00 | ||
Using Relative Polar Coordinate System | 00:00:00 | ||
Drawing Polylines and Splines | 00:00:00 | ||
Drawing Circles | 00:00:00 | ||
Using Circle tool | 00:00:00 | ||
Drawing Arcs | 00:00:00 | ||
Using Arc tool | 00:00:00 | ||
Drawing Rectangles | 00:00:00 | ||
Using Rectangle tool | 00:00:00 | ||
Drawing Polygons | 00:00:00 | ||
Using Polygon tool | 00:00:00 | ||
Drawing Ellipses | 00:00:00 | ||
Using Ellipse tool | 00:00:00 | ||
Drawing Construction Lines, Rays, Points, and Multiple Points | 00:00:00 | ||
Applying Hatches and Gradient Hatches | 00:00:00 | ||
Creating Revision Clouds | 00:00:00 | ||
Using Modify Tools | |||
Making Selection Sets | 00:00:00 | ||
Copying and Moving Objects | 00:00:00 | ||
Using Copy tool | 00:00:00 | ||
Using Move tool | 00:00:00 | ||
Stretching, Scaling, and Offsetting Entities | 00:00:00 | ||
Using Stretch tool | 00:00:00 | ||
Using Scale tool | 00:00:00 | ||
Using Offset tool | 00:00:00 | ||
Rotating and Mirroring Entities | 00:00:00 | ||
Using Rotate tool | 00:00:00 | ||
Using Mirror tool | 00:00:00 | ||
Trimming and Extending Entities | 00:00:00 | ||
Using Trim tool | 00:00:00 | ||
Using Extend tool | 00:00:00 | ||
Creating Fillets | 00:00:00 | ||
Creating Chamfers | 00:00:00 | ||
Creating Blend Curves | 00:00:00 | ||
Using Erase tool | 00:00:00 | ||
Using Explode tool | 00:00:00 | ||
Using Align tool | 00:00:00 | ||
Using Break and Break at Point tools | 00:00:00 | ||
Using Join tool | 00:00:00 | ||
Using Draw and Modify tools | 00:00:00 | ||
Using Overkill command | 00:00:00 | ||
Using Array tool | 00:00:00 | ||
Using Rectangular Array tool | 00:00:00 | ||
Using Path Array tool | 00:00:00 | ||
Using Polar Array tool | 00:00:00 | ||
Using Divide, Measure, and Wipeout tools | 00:00:00 | ||
Using Measure tool | 00:00:00 | ||
Using Region and Boundary tools | 00:00:00 | ||
Using Status Bar | |||
Using Various Status Bar Toggles | 00:00:00 | ||
Using Object Snaps and Object Snap Tracking | 00:00:00 | ||
Using From Snap and Other Snaps | 00:00:00 | ||
Using Selection Cycling option | 00:00:00 | ||
Switching Workspaces | 00:00:00 | ||
Working with Layers | |||
Working with Layers | 00:00:00 | ||
Using Layer States | 00:00:00 | ||
Using Layer Filters | 00:00:00 | ||
Using Match Layer and Layer Walk tools | 00:00:00 | ||
Using Layer Isolate, Unisolate, and Layer Merge tools | 00:00:00 | ||
Using Layer Translator | 00:00:00 | ||
Writing Standard and Annotative Texts | |||
Writing Single Line and Multiline Texts | 00:00:00 | ||
Writing Single Line Text | 00:00:00 | ||
Writing Multiline Text | 00:00:00 | ||
Creating Text Styles | 00:00:00 | ||
Adding Standard and Annotative Dimensions | |||
Using Dimensioning tools – Dimensions Drop-Down | 00:00:00 | ||
Importing Dimension Styles from a drawing into the other drawing | 00:00:00 | ||
Using Quick tool | 00:00:00 | ||
Using Continue and Baseline tools | 00:00:00 | ||
Using Break and Inspect tools | 00:00:00 | ||
Using Adjust Space and Update tools | 00:00:00 | ||
Using Break line and Dimjogline tools | 00:00:00 | ||
Associating and Disassociating Dimensions | 00:00:00 | ||
Using Center mark and Centerline tools | 00:00:00 | ||
Adding Leaders and Tables | |||
Using Leader tool | 00:00:00 | ||
Using Multileader Style Manager | 00:00:00 | ||
Creating a New Multileader Style | 00:00:00 | ||
Using Multileader Align tool | 00:00:00 | ||
Using Multileader Collect tool | 00:00:00 | ||
Adding and Removing Leaders to an Existing Leader | 00:00:00 | ||
Creating and Inserting Tables | 00:00:00 | ||
Adding and Managing Constraints | |||
Concept of Constraints | 00:00:00 | ||
Using Constraint Settings Dialog Box | 00:00:00 | ||
Using Auto constrain tool | 00:00:00 | ||
Using Coincident, Parallel, and Tangent constraint tools | 00:00:00 | ||
Using Collinear, Perpendicular, and Smooth constraint tools | 00:00:00 | ||
Using Concentric, Horizontal, and Symmetric constraint tools | 00:00:00 | ||
Using Fix, Vertical , and Equal constraint tools | 00:00:00 | ||
Using Show Hide, Show All, and Hide All tools | 00:00:00 | ||
Using Linear, Horizontal, and Vertical Dimensional constraint tools | 00:00:00 | ||
Using Aligned Dimensional constraint tool | 00:00:00 | ||
Using Radius, Angular, Diameter, and Convert Dimensional constraint tools | 00:00:00 | ||
Adding Equations to Dimensional constraints | 00:00:00 | ||
Deleting constraints | 00:00:00 | ||
Using Parameters Manager | 00:00:00 | ||
Working with Views and Viewports | |||
Controlling UCS Icon, Viewcube, and Navigation Bar Display | 00:00:00 | ||
Creating Custom Views (New View tool) | 00:00:00 | ||
Using View Manager | 00:00:00 | ||
Understanding the concept of Model Space and Paper Space | 00:00:00 | ||
Creating Model Space Viewports | 00:00:00 | ||
Creating Named Viewports (VPORTS command) | 00:00:00 | ||
Combining Viewports (Join tool) | 00:00:00 | ||
Creating Custom Viewports (MVIEW command) | 00:00:00 | ||
Working with Blocks | |||
Concept of Blocks | 00:00:00 | ||
Creating Blocks | 00:00:00 | ||
Inserting Blocks into the Drawing | 00:00:00 | ||
Creating Annotative Blocks | 00:00:00 | ||
Using Write Block tool | 00:00:00 | ||
Creating Dynamic Blocks | 00:00:00 | ||
Accessing Recent Blocks | 00:00:00 | ||
Importing Blocks from other Drawing into the current Drawing | 00:00:00 | ||
Using Block Editor tool | 00:00:00 | ||
Inserting Blocks using the Design Center | 00:00:00 | ||
Renaming Blocks | 00:00:00 | ||
Using PURGE command to delete unused Named Objects | 00:00:00 | ||
Adding and Managing Attributes | |||
Concept of Attributes | 00:00:00 | ||
Defining Attributes | 00:00:00 | ||
Editing Attributes | 00:00:00 | ||
Managing Attributes | 00:00:00 | ||
Drawing Utilities | |||
Using Drawing Utility tools | 00:00:00 | ||
Assigning Drawing Properties to an Object | 00:00:00 | ||
Using List tool | 00:00:00 | ||
Using ID Point tool | 00:00:00 | ||
Using Quick Select tool | 00:00:00 | ||
Using Select All tool | 00:00:00 | ||
Using Copy clip, Cut clip, and Paste clip tools | 00:00:00 | ||
Using PDFIMPORT and PDFATTACH tools | 00:00:00 | ||
Using Attach tool | 00:00:00 | ||
Using Tool Palettes in AutoCAD | 00:00:00 | ||
Creating Custom Tool Palettes | 00:00:00 | ||
Creating and Managing Groups | |||
Creating Groups | 00:00:00 | ||
Editing Groups | 00:00:00 | ||
Ungrouping Entities | 00:00:00 | ||
Managing Groups | 00:00:00 | ||
Creating Isometric Drawings | |||
Creating an Isometric Drawing | 00:00:00 | ||
Introduction to 3D solid modeling | |||
Understanding and navigating in 3D workspace | 00:00:00 | ||
Using view control and view cube | 00:00:00 | ||
Using Extrude command | 00:00:00 | ||
Using Presspull command | 00:00:00 | ||
Using Revolve command | 00:00:00 | ||
Using Loft tool | 00:00:00 | ||
Using Sweep command | 00:00:00 | ||
Editing and visualizing solids | |||
Using Boolean Operations | 00:00:00 | ||
Using Fillet and chamfer edge | 00:00:00 | ||
Using Extrude, Taper and Move Face | 00:00:00 | ||
Using 3D array command | 00:00:00 | ||
Using Primitive tools | 00:00:00 | ||
Using SOLIDUNION and SOLIDSUBTRACT tools | 00:00:00 | ||
Using SOLIDINTERSECT and INTERFERE tools | 00:00:00 | ||
Using Slice and Thicken tools | 00:00:00 | ||
Using 3D Move and 3D Rotate tools | 00:00:00 | ||
Using 3D Scale tool | 00:00:00 | ||
Using 3D Mirror tool | 00:00:00 | ||
Using 3D Align tool | 00:00:00 | ||
Understanding User co-ordinate system | 00:00:00 | ||
Creating 2D layout views from 3D drawing | 00:00:00 | ||
Surface Modeling | |||
Making surface using extrude, revolve, sweep and loft | 00:00:00 | ||
Patch and Fillet tool | 00:00:00 | ||
Using Offset and surface blend tool | 00:00:00 | ||
Generating Orthographic Views | 00:00:00 | ||
Model Making | 00:00:00 | ||
3d Rendering | 00:00:00 | ||
Course Review Class | |||
Course Review Class:01 | 00:00:00 | ||
Course Review Class:02 | 00:00:00 | ||
Fiverr | |||
Intruduction about fiverr | 00:00:00 | ||
Fiverr account creation | 00:00:00 | ||
Fiverr Profile Setup | 00:00:00 | ||
Fiverr gig creation | 00:00:00 | ||
Fiverr rules regulation | 00:00:00 | ||
Fiverr order sale | 00:00:00 | ||
Order complete and delivery system to client | 00:00:00 | ||
Fiverr Earning Tips | 00:00:00 | ||
Upwork and freelancer.com | |||
Introduction | 00:00:00 | ||
Choosing Your Specialty | 00:00:00 | ||
Signing Up | 00:00:00 | ||
Title and Skill tags that will make your profile pop | 00:00:00 | ||
Designing Your Overview | 00:00:00 | ||
Building your Portfolio | 00:00:00 | ||
Your Profile Intro VIdeo | 00:00:00 | ||
Completing your Profile | 00:00:00 | ||
Choose your project and Client | 00:00:00 | ||
Client is good or bad? | 00:00:00 | ||
Cover letter or PM | 00:00:00 | ||
The Perfect Proposal | 00:00:00 | ||
Interviewing | 00:00:00 | ||
Live project 1 | 00:00:00 | ||
Live project 2 | 00:00:00 | ||
Attracting your first client | 00:00:00 | ||
Time Tracking | 00:00:00 | ||
Getting Paid | 00:00:00 |
Thanks Eshikhon founder and Auto cad teacher
Ami Auto cad er prothomoto kichui bujtam na …Ai eshikhon online Auto Cad course er maddhome ami akhon auto cad 2D,3D drawing korte pari …Auto Cad er teacher Emdadul haque sir kub valo vabe class nan …sir k dhonnobad and Amader sokol problem somadhan kore diyecen…..Tai bolte pari Eshikhon online class amak auto cad shikte help korece ….So many many thanks a lot Eshikhon ,Eshikhon founder and Auto Cad teacher …
I'm Delighted!
Firstly I would like to thanked our Instractor Mr. EMDADUL HAUQUE who is very effective and Friendly.
He make a great deal with Autocad 2d and as well as 3d Concept.
Being a student of this Institution its may hard to put something whatever it is, is ungreatfulness, although!
But I hope Eshikhon must get rid of this soon.
However, for beginner its still good. Without own effort and hard practice you can’t ever be so good of any course.
I'm Delighted!
Firstly I would like to thanked our instructor Md. EMDADUL HAQUE who is very Friendly, Effective and Helpful. Some days ago i cant understand about Auto CAD. He make a great deal with Auto CAD concept. Now i can some thing about Auto CAD. Its possible for me with the help of eshikhon and Md. EMDADUL HAQUE.
Thanks Eshikhon.com
Ami Eshikon teke onek kicho sekte perechi. Amader instructor MD Emdadul Haque khob balo babe class koriachen. Ami asa kori jodi akjon noton kono lok Auto Cad sikte chai tahole 5000- 10000 taka khoroj na kore Eshikho theke shikle balo hobe. kharon ojota taka khoroj kore ja shika jai ta khom khoroche shika jai a khanteke. Ja amra artik babe laboman hobe plus balo akta kicho sikte parbe.
ami eshikon ke mostly abaro thanks janai arokom akta plat from toiri korar jonno. Thanks all.
AutoCAd 2D and 3D Live Course
অসাধারণ একটি কোর্স ছিলো। স্যার আন্তরিকতার সাথে সবকিছু বুঝিয়ে দিয়েছেন।
THANKS ESHIKHON AND SAJIB SIR
Sajib Sir is a good teacher.